Mini Virtual Pinball Table: Episode 5
More backbox work. Creating a VERY thin bezel from MDF and other jobs!
Latest Posts
Mini Virtual Pinball Table: Episode 4
Part Four of my Virtual Pinball Table Build series. This week I build a backbox and get attacked by an oak tree. Is this the wood fighting back?
Mini Virtual Pinball Table: Episode 3
Part Three of my Virtual Pinball Table Build. Filling the inside of the cabinet with all the interesting stuff ready for testing!
Mini Virtual Pinball Table: Episode 2
Part Two of my Virtual Pinball Table Build. Assembling the main cabinet and mounting the playfield monitor. Also making a custom, wooden lockdown bar.
Also Gus the miracle cat makes his debut.
Mini Virtual Pinball Table: Episode 1
Part One of my Virtual Pinball Table Build. Building a mini virtual pinball table running Visual Pinball, Future Pinball and Pinball FX 3 from scratch! Using Pinup Popper as the front end.
In this episode, I explain my intentions for this project. Much of this will change! I give a rundown of the major parts that will go inside the pinball cabinet. And make a start on the first cuts of the main cabinet.
Parts described this episode:
Monacor 16.2790 30W Weatherproof Audio Exciter/Resonator
BOURNS – PTB0143-2010BP-B103 – POTENTIOMETER, SLIDE, 10K, 100MM (NO DUST COVER)
Project TERRYCADE – Part 6
The FINAL episode of Project TERRYCADE. A custom arcade bartop build. Powered by a Raspberry Pi 4.
Finishing the bartop arcade build, plus building a new part to convert it into a full-size arcade machine. This episode is guaranteed to contain 20% less face gurning.
Project TERRYCADE – Part 5
Project TERRYCADE. A custom arcade bartop build. Powered by a Raspberry Pi 4.
The arcade bartop cabinet is back from the painters and it is BEAUTIFUL. Installing the controls and all the other bits that go inside an arcade machine. Some fun with cheap Arduino clones. And my gurning face.
Project TERRYCADE – Part 4
Project TERRYCADE. A custom arcade bartop build. Powered by a Raspberry Pi 4.
Finishing up making holes for speakers and power. And then putting it all together!
Project TERRYCADE – Part 3
Project TERRYCADE. A custom arcade bartop build. Powered by a Raspberry Pi 4.
Control panel holes drilled. T-molding slots cut. Mistakes made and rectified. Other holes cut and drilled. Monitor bezel panel cut and rebated.
Project TERRYCADE – Part 2
Cutting and fixing the battening to the side panels ready to assemble.