Latest Posts

Mini Virtual Pinball Table: Episode 1

Part One of my Virtual Pinball Table Build. Building a mini virtual pinball table running Visual Pinball, Future Pinball and Pinball FX 3 from scratch! Using Pinup Popper as the front end.

In this episode, I explain my intentions for this project. Much of this will change! I give a rundown of the major parts that will go inside the pinball cabinet. And make a start on the first cuts of the main cabinet.

Parts described this episode:

Logitech Z213

Monacor 16.2790 30W Weatherproof Audio Exciter/Resonator

DC 12V 2.0 Channel Amplifier

BOURNS – PTB0143-2010BP-B103 – POTENTIOMETER, SLIDE, 10K, 100MM (NO DUST COVER)

Project TERRYCADE – Part 6

The FINAL episode of Project TERRYCADE. A custom arcade bartop build. Powered by a Raspberry Pi 4.

Finishing the bartop arcade build, plus building a new part to convert it into a full-size arcade machine. This episode is guaranteed to contain 20% less face gurning.

Project TERRYCADE – Part 5

Project TERRYCADE. A custom arcade bartop build. Powered by a Raspberry Pi 4.

The arcade bartop cabinet is back from the painters and it is BEAUTIFUL. Installing the controls and all the other bits that go inside an arcade machine. Some fun with cheap Arduino clones. And my gurning face.

Project TERRYCADE – Part 3

Project TERRYCADE. A custom arcade bartop build. Powered by a Raspberry Pi 4.

Control panel holes drilled. T-molding slots cut. Mistakes made and rectified. Other holes cut and drilled. Monitor bezel panel cut and rebated.

1 2 3 4